How to get EyeTracker in the right position for testing (v1 Station)

Step 1: Monitor stand needs to be set at 90 degrees perpendicular to the desk it is resting on. 

Step 2: The EyeDetect device needs to be set at 22.5 degrees.   Make sure the two white lines are in alignment on the EyeDetect device attached to the bottom on the monitor.

  • If the white lines are in alignment and the monitor is set at 90 degrees the EyeDetect device will be at the required 22.5 degrees.

Step 3: The subjects eyes should align with the center of the monitor.   Make sure the desk and chair the subject is sitting at are at the correct height.

Step 4: The subjects eyes should be 60 cm from the screen.

 mceclip0.png

Have more questions? Submit a request

Comments

Powered by Zendesk